18CrNiMo7 - JIS G 7105-2000

Grade	18CrNiMo7
Corresponding Standard	JIS G 7105-2000 Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels — Part 18 : Bright Products Of Unalloyed and Low Alloy Steels
Classification	Alloy Steel
Properties	Carburizing Ability

18CrNiMo7 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo
Minimum Value	0.15	0.15	0.35	-	-	1.5	1.4	0.25
Maximum Value	0.21	0.4	0.65	0.035	0.035	1.8	1.7	0.35

◎ A lower silicon content may be agreed upon at the time of enquiry and order; in this case, the influence on mechanical properties should be taken into account.

18CrNiMo7 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Hardness HBW
t≤16	TC	≥900
16＜t≤40	TC	≥870
40＜t≤80	TC	≥820
Steel	TC+TA, P+TA或 G+TA		≤229
Steel	TC+M, P+M或 G+M		179~229
Steel	M+TC		179~329®

18CrNiMo7 Corresponding Standards(Same grade name, different standards)

1	ISO 683-18-1996
	18CrNiMo7
2	ISO 683-11-1987
	18CrNiMo7 18CrNiMo7H 18CrNiMo7HH 18CrNiMo7HL
3	JIS G 7105-2000
	18CrNiMo7

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!