中文版
Home Material EN 10088-3-2005
简体 | 繁體
Grade X12CrS13
European Standard Steel Grade 1.4005
Corresponding Standard EN 10088-3-2005
Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
Classification Martensitic Stainless Steel
Properties Corrosion Resistance
X12CrS13 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Mo
Minimum Value 0.06 - - - 0.15 12 -
Maximum Value 0.15 1 1.5 0.04 0.35 14 0.6
① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.
Approximate Comparison Table Martensitic Stainless Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade SS BS EN/BS
Y12Cr13
(Y1Cr13) 		S41617 416 SUS 416 STS 416 416 S41600 X12CrS 13 4005-416-00-I X12CrS 13 1.4005 Z12CF 13
Z11CF13 		X12CrS 13 1.4005 2380 416S21
X12CrS13 Corresponding Standards(Same grade name, different standards)
1 EN 10088-1-2005
X12CrS 13 1.4005
2 ISO TS 15510-2003
X12CrS13
3 EN 10088-3-2005
X12CrS13 1.4005
4 EN 10088-3-2014
X12CrS 13 1.4005
5 ISO 15510-2014
X12CrS13 4005-416-00-I
6 DIN EN 10088-3-2014
X12CrS 13 1.4005
7 ISO 683-18-2014
X12CrS13 4005-416-00-I
8 NF EN 10088-1-2005
X12CrS13 1.4005

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!