X15Cr 13 1.4024 - EN 10088-3-2005

Grade	X15Cr 13
European Standard Steel Grade	1.4024
Corresponding Standard	EN 10088-3-2005 Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance

X15Cr 13 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^*	Cr
Minimum Value	0.12	-	-	-	-	12
Maximum Value	0.17	1	1	0.04	0.03	14

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table

China		Taiwan, China	Japan	South Korea	Germany		European Standard		United Kingdom
GB	ISC	CNS	JIS	KS	DIN EN/DIN	W-Nr.	EN	Numerical Grade	BS EN/BS
13Cr13Mo (1Cr13Mo)	S45710	410J1	SUS 410J1	STS 410J1	X15Cr 13	1.4024	X15Cr 13	1.4024	420S29

X15Cr13 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X15Cr 13 1.4024
2	DIN 17440-1972
	X15Cr 13 1.4024
3	EN 10088-3-2005
	X15Cr 13 1.4024
4	EN 10088-3-2014
	X15Cr 13 1.4024
5	ISO 15510-2014
	X15Cr13 4024-410-09-E
6	DIN EN 10088-3-2014
	X15Cr 13 1.4024
7	DIN 17442-1977
	X15Cr13 1.4024
8	NF EN 10088-2-2005
	X15Cr13 1.4024
9	NF EN 10088-1-2005
	X15Cr13 1.4024

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!