X46Cr13 1.4034 - EN 10088-3-2005

Grade	X46Cr13
European Standard Steel Grade	1.4034
Corresponding Standard	EN 10088-3-2005 Stainless Steels--Part 3:Techincal Delivery Conditions for Semi-Finished Products,Bars, Rods, Wire, Sections and Bright Products of Corrosion Resisting Steels for General Purposes
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance

X46Cr13 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr
Minimum Value	0.43	-	-	-	-	12.5
Maximum Value	0.55	1	1	0.04	0.03	14.5

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Martensitic Stainless Steel

Germany		France	European Standard		United Kingdom
DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	BS EN/BS
X46Cr 13 (X40Cr 13)	1.4034	Z38C 13M	X46Cr13	1.4034	420S45

X46Cr13 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X46Cr 13 1.4034
2	ISO TS 15510-2003
	X46Cr13
3	DIN 17440-1972
	X46Cr 13 X40Cr 13 1.4034
4	EN 10088-3-2005
	X46Cr13 1.4034
5	EN 10088-3-2014
	X46Cr 13 1.4034
6	ISO 15510-2014
	X46Cr13 4034-420-00-I
7	NF A 35-565-1994
	X46Cr13
8	DIN EN 10088-3-2014
	X46Cr 13 1.4034
9	NF EN 10088-2-2005
	X46Cr13 1.4034
10	NF EN 10088-1-2005
	X46Cr13 1.4034

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!