X46CrS13 1.4035 - EN 10088-3-2005

Grade	X46CrS13
European Standard Steel Grade	1.4035
Corresponding Standard	EN 10088-3-2005 Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
Classification	Martensitic Stainless Steel
Properties	Corrosion Resistance

X46CrS13 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr
Minimum Value	0.43	-	-	-	0.15	12
Maximum Value	0.5	1	2	0.04	0.35	14

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table

International Organization for Standardization		European Standard
ISO	Numerical Grade	Numerical Grade
X46CrS13	4035-420-74-E	1.4035

X46CrS13 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X46CrS 13 1.4035
2	EN 10088-3-2005
	X46CrS13 1.4035
3	EN 10088-3-2014
	X46CrS13 1.4035
4	ISO 15510-2014
	X46CrS13 4035-420-74-E
5	DIN EN 10088-3-2014
	X46CrS13 1.4035
6	NF EN 10088-1-2005
	X46CrS13 1.4035

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!