A675 Grade 415 - ASTM A 675/A675M-2014(R2019)

Grade	A675 Grade 415
Corresponding Standard	ASTM A675/A675M-2014(R2019) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
Classification	Carbon Steel

A675 Grade 415 Chemical Element Composition Content (%)

Component	P	S	Cu ^①	Pb ^②
Minimum Value	-	-	0.2	0.15
Maximum Value	0.04	0.05	-	0.35

① when copper steel is specified.
② Leaded Steel—When required, lead may be specified as an added element. When lead is specified as an added element, a range from 0.15 to 0.35 % inclusive shall be furnished. Such a steel is identified by adding the letter L after the grade designation, for example 60L [415L].

A675 Grade 415 Mechanical Properties

Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
415~495	≥205	≥22

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!