中文版
Home Material SAE J404-2009
简体 | 繁體
USA UNS G61500
SAE
Steel Number		 6150
Corresponding Standard SAE J404-2009
Chemical Compositions of SAE Alloy Steels
Classification Alloy Steel
Chemical Element Composition Content (%)
Component C Si Mn P ◎ S ◎ Cr Ni Cu Mo V
Minimum Value 0.48 0.15 0.7 - - 0.8 - - - 0.15
Maximum Value 0.53 0.35 0.9 0.03 0.04 1.1 0.25 0.35 0.06 -
◎ Table lists default values for Phosphorus and Sulfur. Alternate levels shall be agreed upon between purchaser and supplier. Typical values for Flat Roll products: P = 0.030 max, S = 0.035 max. Typical values for ASTM Long Product: P = 0.040 max, S = 0.050 max.
1 Approximate Comparison Table Structural Alloy Steel
China Taiwan, China Japan South Korea United States Germany France Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM/AISI UNS DIN EN/DIN W-Nr. NF EN/NF GOST SS14 BS EN/BS
50CrVA A23503 SUP10 SUP10 SPS6 6150 G61500 51CrV4
(50CrV4) 		1.8159 50CV4 50ХФА 2230 735A50
2 Approximate Comparison Table Spring Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS AISI UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS14 BS EN/BS
50CrVA A23503 SUP10 SUP10 SPS6 6150 G61500 51CrV4 51CrV4 1.8159 50CrV4 51CrV4 1.8159 50ХФА 2230 735A50

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!