G10500 - ASTM A682/A682M-2005

USA UNS	G10500
SAE Steel Number	1050
Corresponding Standard	ASTM A682/A682M-2005 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
Classification	Carbon Steel

Chemical Element Composition Content (%)

Component	C	Si ^①	Mn	P	S	Cr ^{② ③}	Ni ^②	Cu ^②	Mo ^②
Minimum Value	0.48	0.15	0.6	-	-	-	-	-	-
Maximum Value	0.55	0.3	0.9	0.03	0.035	0.25	0.3	0.3	0.1

* There is no specified limit on aluminum, vanadium, niobium, and titanium, but the analysis shall be reported.
① When agreed by purchaser and supplier, other silicon ranges are permissible.
② The sum of copper. nickel, chromium, and molybdenum shall not exceed 0.80 % on heat analysis. When one or more of these elements is specified, the sum does not apply, in which case only the individual limits on the remaining elements will apply.
③ When the chromium is specified or added for antigraphitization, the maximum shall be 1.40 wt. %.

New and Old Grade Replacement List

Corresponding Standard	Grade
ASTM A682/A682M-2005	USA UNS SAE
ASTM A684/A684M-2024	SAE

Approximate Comparison Table High-Quality Carbon Structural Steel

China

Taiwan, China

Japan

South Korea

United States

International Organization for Standardization

Germany

France

Russia

Sweden

United Kingdom

ISC

CNS

JIS

ASTM/AISI

UNS

ISO

DIN EN/DIN

W-Nr.

NF EN/NF

GOST

BS EN/BS

U20502

S50C

SM50C

1050

G10500

C50E4

C50E
Ck53

1.1210

C50E

1674

C50E
080M50

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!