G10600 - ASTM A682/A682M-2005

USA UNS	G10600
SAE Steel Number	1060
Corresponding Standard	ASTM A682/A682M-2005 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
Classification	Carbon Steel

Chemical Element Composition Content (%)

Component	C	Si ^①	Mn	P	S	Cr ^{② ③}	Ni ^②	Cu ^②	Mo ^②
Minimum Value	0.55	0.15	0.6	-	-	-	-	-	-
Maximum Value	0.65	0.3	0.9	0.03	0.035	0.25	0.3	0.3	0.1

* There is no specified limit on aluminum, vanadium, niobium, and titanium, but the analysis shall be reported.
① When agreed by purchaser and supplier, other silicon ranges are permissible.
② The sum of copper. nickel, chromium, and molybdenum shall not exceed 0.80 % on heat analysis. When one or more of these elements is specified, the sum does not apply, in which case only the individual limits on the remaining elements will apply.
③ When the chromium is specified or added for antigraphitization, the maximum shall be 1.40 wt. %.

New and Old Grade Replacement List

Corresponding Standard	Grade
ASTM A682/A682M-2005	USA UNS SAE
ASTM A684/A684M-2024	SAE

Approximate Comparison Table High-Quality Carbon Structural Steel

China		United States		International Organization for Standardization	Germany		France	Russia	Sweden	United Kingdom
GB	ISC	ASTM/AISI	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	SS	BS EN/BS
60	U20602	1060	G10600	C60E4	C60E Ck60	1.1221	C60E XC60	60	1678	C60E 070M60

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!