30Cr A20302 - GB /T 11251-2020

Grade	30Cr
China ISC	A20302
Corresponding Standard	GB /T 11251-2020 Alloy Structural Steel Plate and Strip
Classification	Alloy Steel
Properties	Strength Hardness Impact Toughness Machinability Quench Hardness
Density	7.83 g/cm³

30Cr Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo
Minimum Value	0.27	0.17	0.5	-	-	0.8	-	-	-
Maximum Value	0.34	0.37	0.8	0.03	0.03	1.1	0.3	0.3	0.1

• The composition shall comply with the provisions of GB/T 3077-2015

30Cr Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
Annealing	500~700	≥19

• The surface Brinell hardness of steel plates delivered in a high-temperature tempered state shall comply with the provisions of GB/T 3077-2015

Approximate Comparison Table Structural Alloy Steel

30Cr Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!