G10600 - ASTM A 713-2024

USA UNS	G10600
SAE Steel Number	1060
Corresponding Standard	ASTM A 713-2024 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
Classification	Carbon Steel

Chemical Element Composition Content (%)

Component	C	Mn	P	S
Minimum Value	0.55	0.6	-	-
Maximum Value	0.65	0.9	0.04	0.05

① The following ranges of silicon are commonly specified for high-carbon steels: 0.10% to 0.20%; 0.15% to 0.30%; 0.20% to 0.40 %; or 0.30 % to 0.60 %.
② A chemical composition other than those shown in Table may be supplied when agreed upon by the manufacturer and purchaser.

1 Approximate Comparison Table High-Quality Carbon Structural Steel

China		United States		International Organization for Standardization	Germany		France	Russia	Sweden	United Kingdom
GB	ISC	ASTM/AISI	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	SS	BS EN/BS
60	U20602	1060	G10600	C60E4	C60E Ck60	1.1221	C60E XC60	60	1678	C60E 070M60

2 Approximate Comparison Table Wrought Aluminum and Aluminum Alloy

China	Japan	United States		International Organization for Standardization		European Standard
GB	JIS	ASTM	UNS	ISO	Numerical Grade	EN
1060	1060 A91060	1060	A91060	Al99.6	A91060	EN-AW-Al99.6

3 Approximate Comparison Table High-Quality Carbon Structural Steel

China	Japan	United States	International Organization for Standardization	Germany	European Standard		Russia	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	EN	Numerical Grade	GOST	BS EN/BS
60	S58C	1060	C60	C60	C60	1.0601	60 60G	070M60

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!