X3CrNiMoBN17-13-3 1.4910 - EN 10269-1999

Grade	X3CrNiMoBN17-13-3
European Standard Steel Grade	1.4910
Corresponding Standard	EN 10269-2006 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X3CrNiMoBN17-13-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N	B
Minimum Value	-	-	-	-	-	16	12	2	0.1	0.0015
Maximum Value	0.04	0.75	2	0.035	0.015	18	14	3	0.18	0.005

①Elements not listed in this table may not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the usefulness of the steel.

X3CrNiMoBN17-13-3 Mechanical Properties

diameter d mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
d≤160	Solid Solution Annealing (+AT) 550~750	Solid Solution Annealing (+AT) ≥260	Lo = 5.65√So ≥35

①+AT = solution annealed; +C = cold work hardened; +N = normalized; +NT = normalized and tempered; +P = precipitation hardened; +QT = quenched and tempered; WW = Warm worked.

Approximate Comparison Table

International Organization for Standardization		European Standard
ISO	Numerical Grade	EN	Numerical Grade
X3CrNiMoBN 17-13-3	4910-316-77-E	X3CrNiMoBN 17-13-3	1.4910

X3CrNiMoBN17-13-3 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X3CrNiMoBN 17-13-3 1.4910
2	EN 10269-2006
	X3CrNiMoBN17-13-3 1.4910
3	EN 10302-2008
	X3CrNiMoBN 17-13-3 1.4910
4	EN 10269-2013
	X3CrNiMoBN 17-13-3 1.4910
5	ISO 15510-2014
	X3CrNiMoBN17-13-3 4910-316-77-E
6	NF EN 10269-1999
	X3CrNiMoBN17-13-3 1.4910
7	DIN EN 10269-2014
	X3CrNiMoBN 17-13-3 1.4910
8	ISO 9328-7-2018
	X3CrNiMoBN17-13-3
9	NF EN 10088-1-2005
	X3CrNiMoBN17-13-3 1.4910
10	NF EN 10028-7-2008
	X3CrNiMoBN17-13-3 1.4910
11	NF EN 10028-7-2000
	X3CrNiMoBN17-13-3 1.4910

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!