CS Type A - ASTM A875/A875-2023

Grade	CS Type A
Corresponding Standard	ASTM A875/A875-2023 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
Classification	Carbon Steel

CS Type A Chemical Element Composition Content (%)

Component	C	Mn	P	S	Cr	Ni	Cu	Mo	Ti	V	Nb
Minimum Value	-	-	-	-	-	-	-	-	-	-	-
Maximum Value	0.1	0.6	0.03	0.035	0.15	0.2	0.25	0.06	0.025	0.008	0.008

① Al、N、B: There is no specified limit, but the analysis shall be reported.
② when a deox心zed steel is required for the application, the purchaser has the option to order CS and FS to a minimum of 0.01 % total aluminum.
③ Steel is permitted to be furnished as a vacuum degassed or chemically stabilized steel, or both, at the producer\'s option.
④ For carbon levels less than or equal to 0.02 %, vanadium, columbium, or titanium, or combinations thereof are permitted to be used as stabilizing elements at the producer\'s option. In such cases, the applicable limit for vanadium and columbium shall be 0.10 % max and the limit for titanium shall be 0.15 % max.

CS Type A Mechanical Properties

Yield Point σ_s Mpa	Elongation or Extension Rate δ %
170~380	≥20

CSTypeA Corresponding Standards(Same grade name, different standards)

1	ASTM A1011/A1011M-2018(a)
	CS Type A
2	ASTM A1008/A1008M-2021(a)
	CS Type A
3	ASTM A875/A875-2023
	CS Type A

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!