CS Type B - ASTM A875/A875-2023

Grade	CS Type B
Corresponding Standard	ASTM A875/A875-2023 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
Classification	Carbon Steel

CS Type B Chemical Element Composition Content (%)

Component	C	Mn	P	S	Cr	Ni	Cu	Mo	Ti	V	Nb
Minimum Value	0.02	-	-	-	-	-	-	-	-	-	-
Maximum Value	0.15	0.6	0.03	0.035	0.15	0.2	0.25	0.06	0.025	0.008	0.008

① Al、N、B: There is no specified limit, but the analysis shall be reported.
② when a deox心zed steel is required for the application, the purchaser has the option to order CS and FS to a minimum of 0.01 % total aluminum.
③ For CS and FS, specify Type B to avoid carbon levels below 0.02 %.

CS Type B Mechanical Properties

Yield Point σ_s Mpa	Elongation or Extension Rate δ %
205~380	≥20

CSTypeB Corresponding Standards(Same grade name, different standards)

1	ASTM A1011/A1011M-2018(a)
	CS Type B
2	ASTM A1008/A1008M-2021(a)
	CS Type B
3	ASTM A875/A875-2023
	CS Type B

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!