中文版
Home Material ASME SA-213/SA-213M-2019
简体 | 繁體
Grade TP321
S32100
Corresponding Standard ASME SA-213/SA-213M-2019
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler,Superheater, and Heat-Exchanger Tubes
Classification Austenitic Stainless Steel
TP321 Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni More
Minimum Value - - - - - 17 9 Ti：5(C+N)~0.70
Maximum Value 0.08 1 2 0.045 0.03 19 12
TP321 Mechanical Properties
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
≥515 ≥205 ≥35 HBW: ≤192
HV:: ≤200
HRB: ≤90
1 Approximate Comparison Table Austenitic Stainless Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
06Cr18Ni11Ti S32168 321 SUS 321 STS 321 321 S32100 X6CrNiTi 18-10 4541-321-00-I X6CrNiTi 18-10
(X10CrNiTi 18-9) 		1.4541 Z6CNT 18-10 X6CrNiTi 18-10 1.4541 09Х18Н10Т
Х18Н10Т 		2337 321S12
321S31
2 Approximate Comparison Table Austenitic Heat-Resistant Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
06Cr18Ni11Ti
(0Cr18Ni11Ti) 		S32168 321 SUS 321 STS 321 321 S32100 X6CrNiTi 18-10 X6CrNiTi 18-10
(X10CrNiTi 18-9) 		1.4541 Z6CNT 18-10 X6CrNiTi 18-10 1.4541 09Х18Н10Т 2337 321S12
321S31
3 Approximate Comparison Table Austenitic Stainless Steel
China Japan United States International Organization for Standardization Germany France Russia United Kingdom
GB JIS ASTM/AISI UNS ISO DIN EN/DIN NF EN/NF GOST BS EN/BS
0Cr18Ni11Ti
0Cr18Ni9Ti 		SUS321 321 S32100 15 X10CrNiTi18-9 Z6CNT18.10 08Х18Н10Т 321S12
321S20
4 Approximate Comparison Table Stainless Steels for Cold Heading and Cold Extruding
China Japan United States International Organization for Standardization European Standard
GB ISC JIS ASTM/AISI UNS ISO Numerical Grade EN Numerical Grade
06Cr18Ni11Ti
(0Cr18Ni11Ti) 		S32168 SUS321 321 S32100 X6CrNiTi18-10 4541-321-00-I X6CrNiTi18-10 1.4541
TP321 Corresponding Standards(Same grade name, different standards)
1 YB /T 4323-2013
TP321
2 ASME SA-213/SA-213M-2019
TP321 S32100
3 ASTM A376/A376M-2019
TP 321 S32100
4 ASTM A409/A409M-2019
TP 321 S32100
5 ASTM A632-2019(2025)
TP 321 S32100
6 ASME SA-312/SA-312M-2023
TP321 S32100
7 ASME SA-249/SA-249M-2023
TP321 S32100
8 ASTM A943/A943M-2001(R2019)
TP321 S32100

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!