grade 6 - ASME SA-333/SA-333M-2023

Grade	grade 6
Corresponding Standard	ASME SA-333/SA-333M-2023 Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
Classification	Alloy Steel

grade 6 Chemical Element Composition Content (%)

Component	C	Si	Mn ^①	P	S	Cr	Ni	Cu	Mo	V	Nb ^②
Minimum Value	-	0.1	0.29	-	-	-	-	-	-	-	-
Maximum Value	0.3	-	1.06	0.025	0.025	0.3	0.4	0.4	0.12	0.08	0.02

grade 6 Mechanical Properties

Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
≥415	≥240	l：≥30；t：≥16	-45°C ≥18

Approximate Comparison Table Processing Titanium and Titanium Alloys

China	United States		International Organization for Standardization		Germany		France	Russia	United Kingdom
GB	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	NF EN/NF	GOST	BS EN/BS
TA7	Grade 6	R54520	Ti-5Al-2.5Sn	R54520	TiAl5Sn2	3.7115 R54520	T-A5E R54520	ВТ5-1	Ti-5Al-2.5Sn R54520

grade6 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!