SS Grade 33 - ASTM A875/A875-2023

Grade	SS Grade 33
Corresponding Standard	ASTM A875/A875-2023 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
Classification	Carbon Steel

SS Grade 33 Chemical Element Composition Content (%)

Component	C	Mn	P	S	Cr	Ni	Cu	Mo	Ti	V	Nb
Minimum Value	-	-	-	-	-	-	-	-	-	-	-
Maximum Value	0.2	1.35	0.1	0.04	0.15	0.2	0.25	0.06	0.025	0.008	0.008

① Al、N、B: There is no specified limit, but the analysis shall be reported.
② For carbon levels less than or equal to 0.02 %, vanadium, columbium, or titanium, or combinations thereof, are permitted to be used as stabilizing elements at the producer\'s option. In such cases, the applicable limit for vanadium and columbium shall be 0.10 % max, and the limit of titanium shall be 0.15 % max.

SS Grade 33 Mechanical Properties

Tensile Strength σ_b ksi	Yield Point σ_s ksi	Elongation or Extension Rate δ %
≥45	≥33	≥20

Approximate Comparison Table Carbon Structural Steel and Engineering Steel

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
Q235A Q235B Q235D	SM400A SS400	1015 A283C GradeC GradeD SSGrade33	E235B Fe360B	RSt37-2 St37-2	E24-2	S235JR Fe360B① Fe360BFN① S235JRG2①	1.0038(dubl)	St2ps St2sp St3ps St3sp	1311 1312	40A 40B

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!