SS Grade 340 Class 2 - ASTM A875/A875-2023

Grade	SS Grade 340 Class 2
Corresponding Standard	ASTM A875/A875-2023 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
Classification	Carbon Steel

SS Grade 340 Class 2 Chemical Element Composition Content (%)

Component	C	Mn	P	S	Cr	Ni	Cu	Mo	Ti	V	Nb
Minimum Value	-	-	-	-	-	-	-	-	-	-	-
Maximum Value	0.25	1.35	0.2	0.04	0.15	0.2	0.25	0.06	0.025	0.008	0.008

① Al、N、B: There is no specified limit, but the analysis shall be reported.
② For carbon levels less than or equal to 0.02 %, vanadium, columbium, or titanium, or combinations thereof, are permitted to be used as stabilizing elements at the producer\'s option. In such cases, the applicable limit for vanadium and columbium shall be 0.10 % max, and the limit of titanium shall be 0.15 % max.

SS Grade 340 Class 2 Mechanical Properties

Yield Point σ_s Mpa	Elongation or Extension Rate δ %
≥340	≥12

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!