BHS Grade 180 - ASTM A875/A875-2023

Grade	BHS Grade 180
Corresponding Standard	ASTM A875/A875-2023 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
Classification	Carbon Steel

BHS Grade 180 Chemical Element Composition Content (%)

Component	C	Mn	P	S	Cr	Ni	Cu	Mo	Ti	V	Nb
Minimum Value	-	-	-	-	-	-	-	-	-	-	-
Maximum Value	0.12	1.5	0.12	0.03	0.15	0.2	0.2	0.06	0.025	0.008	0.008

① Al、N、B: There is no specified limit, but the analysis shall be reported.
② For carbon levels less than or equal to 0.02 %, vanadium, columbium, or titanium, or combinations thereof, are permitted to be used as stabilizing elements at the producer\'s option. In such cases, the applicable limit for vanadium and columbium shall be 0.10 % max, and the limit of titanium shall be 0.15 % max.

BHS Grade 180 Mechanical Properties

Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
≥300	≥180	≥30

Approximate Comparison Table Cold-Formable High Yield Strength Steel

China	United States	European Standard	Baosteel
GB	ASTM	EN	Baosteel Grade
CR180BH	BHS Grade180	HC180B	HC180B

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!