A792 CS Type A - ASTM A792/A792M-2023

Grade	A792 CS Type A
Corresponding Standard	ASTM A792/A792M-2023 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
Classification	Alloy Steel

A792 CS Type A Chemical Element Composition Content (%)

Component	C	Mn	P	S	Cr	Ni	Cu	Mo	Ti	V	Nb
Minimum Value	-	-	-	-	-	-	-	-	-	-	-
Maximum Value	0.1	0.6	0.03	0.035	0.15	0.2	0.25	0.06	0.025	0.008	0.008

① Al, N, B: There is no specified requirement, but the analysis result shall be reported.
② When a deoxidized steel is required for the application, the purchaser has the option to order CS, FS, and HTS to a minimum of 0.01 % total aluminum.
③ Steel is permitted to be furnished as a vacuum degassed or chemically stabilized sleel, or both, at producer\'s option.
④ For carbon levels less than or equal to 0.02 %, vanadium, columbium, or titanium, or combinations thereof, are permitted to be used as stabilizing elements at producer\'s option. In such cases, the applicable limit for vanadium and columbium shall be 0.10 % max, and the limit for titanium shall be 0.15 % max.

A792 CS Type A Mechanical Properties

Yield Point σ_s Mpa	Elongation or Extension Rate δ %
205~410	≥20

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!