A792 HSLAS 380 Class 2 - ASTM A792/A792M-2023

Grade	A792 HSLAS 380 Class 2
Corresponding Standard	ASTM A792/A792M-2023 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
Classification	Alloy Steel

A792 HSLAS 380 Class 2 Chemical Element Composition Content (%)

Component	C	Mn	S	Cr	Ni	Cu	Mo	Ti	V	Nb
Minimum Value	-	-	-	-	-	-	-	0.01	0.01	0.005
Maximum Value	0.15	1.2	0.035	0.15	0.2	0.2	0.16	-	-	-

① HSLAS steels commonly contain the strengthening elements columbium. vanadium, and titanium added singly or in combination. The minimum requirements only apply lo the microalloy elements selected for strengthening of the steel.
② P, Si, Al, N: There is no specified requirement, but the analysis result shall be reported.

A792 HSLAS 380 Class 2 Mechanical Properties

Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
≥450	≥380	≥18

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!