X2CrMoTi18-2 1.4521 - EN 10088-2-2024

Grade	X2CrMoTi18-2
European Standard Steel Grade	1.4521
Corresponding Standard	EN 10088-2-2024 Stainless Steels - Part 2: Technical Delivery Conditions for Sheet/Plate and Strip of Corrosion Resistant Steels for General Purposes
Classification	Ferritic Stainless Steel

X2CrMoTi18-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	N	Al	More
Minimum Value	-	-	-	-	-	17	1.75	-	0.1	Ti: [4(C+N)+0.15]~0.8②
Maximum Value	0.025	1	1	0.04	0.015	20	2.5	0.03	0.3	Ti: [4(C+N)+0.15]~0.8②

X2CrMoTi18-2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
C：T ≤ 8	+A	420~640	long.：≥300 tr.：≥320	long.+tr. T＜3mm,A80①: ≥20 T≥3mm,A②: ≥20
H：T ≤ 13.5	+A	400~600	long.：≥280 tr.：≥300	long.+tr. T＜3mm,A80①: ≥20 T≥3mm,A②: ≥20
P：T ≤ 12	+A	420~620	long.：≥280 tr.：≥300	long.+tr. T＜3mm,A80①: ≥20 T≥3mm,A②: ≥20

Approximate Comparison Table Ferritic Stainless Steel

China	Japan	United States		International Organization for Standardization		France	European Standard		Sweden
ISC	JIS	ASTM	UNS	ISO	Numerical Grade	NF EN/NF	EN	Numerical Grade	SS
S11972	SUS 444	444	S44400	X2CrMoTi18-2	4521-444-00-I	Z3CDT18-02	X2CrMoTi18-2	1.4521	2326

X2CrMoTi18-2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!