X2CrNiMo 18-14-3 1.4435 - EN 10088-3-2005

Grade	X2CrNiMo 18-14-3
European Standard Steel Grade	1.4435
Corresponding Standard	EN 10088-3-2005 Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

X2CrNiMo 18-14-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^*	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	17	12.5	2.5	-
Maximum Value	0.03	1	2	0.045	0.03	19	15	3	0.11

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

X2CrNiMo 18-14-3 Mechanical Properties

thickness/diameter t/d mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
t≤160*	500~700	≥200	(long.) ≥40	≤215	(long.) ≥100
160<t≤250*	500~700	≥200	(tr.) ≥30	≤215	(tr.) ≥60
t≤10**	600~950	≥400	(long.) ≥25	-	-
10<t≤16**	600~950	≥400	(long.) ≥25	-	-
16<t≤40**	500~850	≥235	(long.) ≥30	-	(long.) ≥100
40<t≤63**	500~850	≥235	(long.) ≥30	-	(long.) ≥100
63<t≤160**	500~700	≥235	(long.) ≥40	-	(long.) ≥100
160<t≤250**	500~700	≥235	(tr.) ≥30	-	(tr.) ≥60

+AT=solution annealed；+C=cold worked， +C suffix number represents the tensile strength grade, the minimum tensile strength value

Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
00Cr17Ni14Mo2	SUS316L	316L TP316L	Type19a	X2CrNiMo18-14-3	Z3CND17-12-03 Z3CND18-14-03	X2CrNiMo18-14-3	1.4435	03KH17N14M3	2353	316S13 316S14

X2CrNiMo18-14-3 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X2CrNiMo 18-14-3 1.4435
2	EN 10253-4-2003
	X2CrNiMo18-14-3 1.4435
3	EN 10250-4-1999
	X2CrNiMo 18-14-3 1.4435
4	ISO TS 15510-2003
	X2CrNiMo18-14-3
5	EN 10088-2-2005
	X2CrNiMo18-14-3 1.4435
6	DIN 17440-1972
	X2CrNiMo 18-14-3 X2CrNiMo 18-12 1.4435
7	EN 10088-3-2005
	X2CrNiMo 18-14-3 1.4435
8	EN 10297(2)-2005
	X2CrNiMo18-14-3 1.4435
9	EN 10088-3-2014
	X2CrNiMo18-14-3 1.4435
10	ISO 15510-2014
	X2CrNiMo18-14-3 4435-316-91-I
11	ISO 9328-7-2018
	X2CrNiMo18-14-3
12	DIN EN 10088-3-2014
	X2CrNiMo18-14-3 1.4435
13	NF EN 10088-2-2005
	X2CrNiMo18-14-3 1.4435
14	NF EN 10088-1-2005
	X2CrNiMo18-14-3 1.4435
15	NF EN 10028-7-2008
	X2CrNiMo18-14-3 1.4435
16	NF EN 10296-2-2005
	X2CrNiMo18-14-3 1.4435
17	NF EN 10028-7-2000
	X2CrNiMo18-14-3 1.4435
18	DIN EN 10296-2-2006
	X2CrNiMo18-14-3 1.4435
19	EN 10272-2016
	X2CrNiMo18-14-3 1.4435

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!