S30451 - ASME SA-666-2023 - H2ABC

中文版

	S30451
AISI American Iron and Steel Institute	304N
Corresponding Standard	ASME SA-666-2023 Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	N
Minimum Value	-	-	-	-	-	18	8	0.1
Maximum Value	0.08	0.75	2	0.045	0.03	20	10.5	0.16

Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Sheet, strip, plate, flat bar	Annealed	≥550	≥240	≥30	HB≤217；HRB≤95
Sheet, strip, plate, flat bar	1/16硬	≥620	≥310	≥40
Sheet, strip, plate, flat bar	1/8硬	≥690	≥380	≥37
Sheet, strip, plate, flat Bar	1/4硬	≥860	≥515	≥12
Sheet, strip, plate, flat Bar	1/2硬	≥1035	≥760	T＜0.38mm: ≥6 T≥0.38mm: ≥8

Approximate Comparison Table Austenitic Stainless Steel

China		Taiwan, China	Japan	South Korea	United States		International Organization for Standardization		European Standard
GB	ISC	CNS	JIS	KS	ASTM	UNS	ISO	Numerical Grade	EN	Numerical Grade
06Cr19Ni10N (0Cr19Ni9N)	S30458	304N1	SUS 304N1 SUS 304N2	STS 304N1	304N	S30451	X5CrNiN 19-9	4315-304-51-I	X5CrNiN 19-9	1.4315

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!