X3CrNiCuMo 17-11-3-2 1.4578 - EN 10088-1-2005

Grade	X3CrNiCuMo 17-11-3-2
European Standard Steel Grade	1.4578
Corresponding Standard	EN 10088-1-2005 Staehle Stainless steels. Part 1:List of stainless steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X3CrNiCuMo 17-11-3-2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^ⓒ	Mo	N
Minimum Value	-	-	-	-	-	16.5	10	3	2	-
Maximum Value	0.04	1	2	0.045	0.015	17.5	11	3.5	2.5	0.11

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

Approximate Comparison Table Stainless steels for cold heading and cold extruding

International Organization for Standardization		European Standard
ISO	Numerical Grade	EN	Numerical Grade
X3CrNiCuMo17-11-3-2	4578-316-76-E	X3CrNiCuMo17-11-3-2	1.4578

X3CrNiCuMo17-11-3-2 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X3CrNiCuMo 17-11-3-2 1.4578
2	EN 10263-5-2001
	X3CrNiCuMo17-11-3-2 1.4578
3	EN 10088-3-2005
	X3CrNiCuMo 17-11-3-2 1.4578
4	EN 10088-3-2014
	X3CrNiCuMo 17-11-3-2 1.4578
5	ISO 15510-2014
	X3CrNiCuMo17-11-3-2 4578-316-76-E
6	DIN EN 10263-5-2018
	X3CrNiCuMo17-11-3-2 1.4578
7	DIN EN 10088-3-2014
	X3CrNiCuMo 17-11-3-2 1.4578
8	ISO 4954-2018
	X3CrNiCuMo17-11-3-2 4578-316-76-E
9	NF EN 10088-1-2005
	X3CrNiCuMo17-11-3-2 1.4578
10	EN 10263-5-2017
	X3CrNiCuMo17-11-3-2 1.4578
11	ISO 4954-2-2024
	X3CrNiCuMo17-11-3-2 4578-316-76-E

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!