X3CrNiMo17-12-3 1.4436 - EN 10088-2-2024

Grade	X3CrNiMo17-12-3
European Standard Steel Grade	1.4436
Corresponding Standard	EN 10088-2-2024 Stainless Steels - Part 2: Technical Delivery Conditions for Sheet/Plate and Strip of Corrosion Resistant Steels for General Purposes
Classification	Austenitic Stainless Steel

X3CrNiMo17-12-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^①	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	16.5	10.5	2.5	-
Maximum Value	0.05	1	2	0.045	0.015	18.5	13	3	0.1

X3CrNiMo17-12-3 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
C：T ≤ 8	+AT	550~700	tr©℗. Rp0.2：≥240 Rp1.0®：≥270	tr. T＜3mm, A80①: ≥40 T≥3mm, A②: ≥40 ©	-
H：T ≤ 13.5	+AT	550~700	tr©℗. Rp0.2：≥220 Rp1.0®：≥260	tr. T＜3mm, A80①: ≥40 T≥3mm, A②: ≥40 ©	T＞10mm long.: ≥100 tr.: ≥60
P：T ≤ 75	+AT	530~730	tr©℗. Rp0.2：≥220 Rp1.0®：≥260	tr. T＜3mm, A80①: ≥40 T≥3mm, A②: ≥40 ©	T＞10mm long.: ≥100 tr.: ≥60

Approximate Comparison Table Stainless Steels for Cold Heading and Cold Extruding

China		Japan	United States		International Organization for Standardization		European Standard
GB	ISC	JIS	ASTM/AISI	UNS	ISO	Numerical Grade	EN	Numerical Grade
06Cr17Ni12Mo2 (0Cr17Ni12Mo2)	S31608	SUS316	316	S31600	X3CrNiMo17-12-3	4436-316-00-I	X3CrNiMo17-12-3	1.4436

X3CrNiMo17-12-3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!