X2CrNiMo18-14-3 1.4435 - EN 10028-7-2016

Grade	X2CrNiMo18-14-3
European Standard Steel Grade	1.4435
Corresponding Standard	EN 10028-7-2016 Flat Products Made of Steels for Pressure Purposes - Part 7: Stainless Steels
Classification	Austenitic Stainless Steel

X2CrNiMo18-14-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N
Minimum Value	-	-	-	-	-	17	12.5	2.5	-
Maximum Value	0.03	1	2	0.045	0.015	19	15	3	0.1

X2CrNiMo18-14-3 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
C：T ≤ 8	+AT	550~700	tr© Rp0.2：≥240 Rp1.0：≥270	T＜3mm, A80① long.+tr. :≥40； T≥3mm, A② long.+tr. :≥40 ©	20°C long.: ≥100 tr.: ≥60 -196°C tr.: ≥60
H：T ≤ 13.5	+AT	550~700	tr© Rp0.2：≥220 Rp1.0：≥260	T＜3mm, A80① long.+tr. :≥40； T≥3mm, A② long.+tr. :≥40 ©	20°C long.: ≥100 tr.: ≥60 -196°C tr.: ≥60
P：T ≤ 75	+AT	520~670	tr© Rp0.2：≥220 Rp1.0：≥260	T＜3mm, A80① long.+tr. :≥45； T≥3mm, A② long.+tr. :≥45 ©	20°C long.: ≥100 tr.: ≥60 -196°C tr.: ≥60

• C=cold rolled strip；H=hot rolled strip；P=hot rolled plate
• +A=Annealed；+AT=Solution annealed
• B=width；T=thick

Approximate Comparison Table Austenitic Stainless Steel

China	Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
00Cr17Ni14Mo2	SUS316L	316L TP316L	Type19a	X2CrNiMo18-14-3	Z3CND17-12-03 Z3CND18-14-03	X2CrNiMo18-14-3	1.4435	03KH17N14M3	2353	316S13 316S14

X2CrNiMo18-14-3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!