Grade Cu-ETP
European Standard Steel Grade CW004A
Corresponding Standard EN 13599-2014
Copper and Copper Alloys - Copper Plate, Sheet and Strip for Electrical Purposes
Classification Copper and Copper Alloys
Cu-ETP Chemical Element Composition Content (%)
Component Cu Pb Bi Ag O Other Total
Minimum Value 99.9 - - - - -
Maximum Value - 0.005 0.0005 0.015 0.04 0.03
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
① Including silver, up to a maximum of 0,015 %.
② Oxygen content up to 0,060 % is permitted, subject to agreement between the purchaser and the supplier.
③ Excluding Ag, O.
Cu-ETP Mechanical Properties
thickness
mm
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Specified Plastic Yield Strength
Rp0.2
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
0.10~5 H040 HV: 40~65
0.10~5 R220 220~260 ≤140 (given for information only) 0.1≤t≤2.5:≥33
t>2.5:≥42
0.20~10 H040 HV: 40~65
0.20~10 R200 200~250 ≤140 (given for information only) t>2.5:≥42
0.10~10 H065 HV: 65~95
0.10~10 R240 240~300 ≥180 0.1≤t≤2.5:≥8
t>2.5:≥15
0.10~10 H090 HV: 90~110
0.10~10 R290 290~360 ≥250 0.1≤t≤2.5:≥4
t>2.5:≥6
0.10~2 H110 HV: ≥110
0.10~2 R360 ≥360 ≥320 0.1≤t≤2.5:≥2
0.1~0.2 R220 ≥200 ≥28
Approximate Comparison Table Processing Pure Copper, Silver Copper
Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
C1100 C11000 Cu-ETP E-Cu58
E2-Cu58
2.0065 CuA1 Cu-ETP CW004A M1 5010 C101

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!