Cu-PHC CW020A - EN 13599-2014

Grade	Cu-PHC
European Standard Steel Grade	CW020A
Corresponding Standard	EN 13599-2014 Copper and Copper Alloys - Copper Plate, Sheet and Strip for Electrical Purposes
Classification	Copper and Copper Alloys

Cu-PHC Chemical Element Composition Content (%)

Component	P	Cu ^①	Pb	Bi	Ag ^①	Other Total ^②
Minimum Value	0.001	99.95	-	-	-	-
Maximum Value	0.006	-	0.005	0.0005	0.015	0.03

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

① Including silver, up to a maximum of 0,015 %.
② Excluding Ag, P.
③ The oxygen content shall be such that the material conforms to the hydrogen embrittlement requirements of EN 1976.

Cu-PHC Mechanical Properties

thickness mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Hardness HBW
0.10~5	H040				HV: 40~65
0.10~5	R220	220~260	≤140 (given for information only)	0.1≤t≤2.5：≥33 t＞2.5：≥42
0.20~10	H040				HV: 40~65
0.20~10	R200	200~250	≤140 (given for information only)	t＞2.5：≥42
0.10~10	H065				HV: 65~95
0.10~10	R240	240~300	≥180	0.1≤t≤2.5：≥8 t＞2.5：≥15
0.10~10	H090				HV: 90~110
0.10~10	R290	290~360	≥250	0.1≤t≤2.5：≥4 t＞2.5：≥6
0.10~2	H110				HV: ≥110
0.10~2	R360	≥360	≥320	0.1≤t≤2.5：≥2

Approximate Comparison Table Copper and Copper Alloy

Germany		European Standard
DIN EN/DIN	W-Nr.	EN	Numerical Grade
SE-Cu	2.0070	Cu-PHC	CW020A

Cu-PHC Corresponding Standards(Same grade name, different standards)

1	CEN /TS 13388-2020
	Cu-PHC CW020A
2	DIN EN 12449-2019
	Cu-PHC CW020A
3	EN 12449-2023
	Cu-PHC CW020A
4	EN 13599-2014
	Cu-PHC CW020A

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!