X2CrNiMoCuWN25-7-4 1.4501 - EN 10088-2-2024

Grade	X2CrNiMoCuWN25-7-4
European Standard Steel Grade	1.4501
Corresponding Standard	EN 10088-2-2024 Stainless Steels - Part 2: Technical Delivery Conditions for Sheet/Plate and Strip of Corrosion Resistant Steels for General Purposes，
Classification	Duplex Stainless Steel

X2CrNiMoCuWN25-7-4 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N	W
Minimum Value	-	-	-	-	-	24	6	0.5	3	0.2	0.5
Maximum Value	0.03	1	1	0.035	0.015	26	8	1	4	0.3	1

X2CrNiMoCuWN25-7-4 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
C：T ≤ 8	+AT	750~1000	tr©℗.：≥550	long.+tr. T＜3mm, A80①: ≥20 T≥3mm, A②: ≥20	T＞10mm long.: ≥150 tr.: ≥90
H：T ≤ 13.5	+AT	750~1000	tr©℗.：≥530	long.+tr. T＜3mm, A80①: ≥20 T≥3mm, A②: ≥20	T＞10mm long.: ≥150 tr.: ≥90
P：T ≤ 75	+AT	730~930	tr©℗.：≥530	long.+tr. T＜3mm, A80①: ≥25 T≥3mm, A②: ≥25	T＞10mm long.: ≥100 tr.: ≥60

1 Approximate Comparison Table Austenitic-Ferritic Stainless Steel

China		Japan	United States	International Organization for Standardization	Germany		European Standard
GB	ISC	JIS	UNS	ISO	DIN EN/DIN	W-Nr.	EN	Numerical Grade
022Cr25Ni7Mo4WCuN 00Cr23Ni7Mo3.5WCuN*	S27603	SUS329J2L	S32760	X2CrNiMoCuWN 25-7-4	X2CrNiMoCuWN 25-7-4	1.4501	X2CrNiMoCuWN 25-7-4	1.4501

2 Approximate Comparison Table Austenitic-Ferritic Stainless Steel

X2CrNiMoCuWN25-7-4 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!