X1NiCrMoCuN 25-20-7 1.4529 - EN 10088-3-2005

Grade	X1NiCrMoCuN 25-20-7
European Standard Steel Grade	1.4529
Corresponding Standard	EN 10088-3-2005 Stainless steels--Part 3:Techincal delivery conditions for semi-finished products,bar,rods and sections for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance

X1NiCrMoCuN 25-20-7 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	-	-	-	19	24	0.5	6	0.15
Maximum Value	0.02	0.5	1	0.03	0.01	21	26	1.5	7	0.25

① Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the suitability of the steel.

1 Approximate Comparison Table

China	United States		International Organization for Standardization		Germany		European Standard
GB	Commercial Grade	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	Numerical Grade
25-6Mo	Incoloy926	N08926	X1NiCrMoCuN25-20-7	4529-089-26-I	X1NiCrMoCuN25-20-7	1.4529	X1NiCrMoCuN25-20-7	1.4529

2 Approximate Comparison Table

United States	European Standard
ASTM	EN	Numerical Grade
N08926 NO8367	X1NiCrMoCuN25-20-7	1.4529

X1NiCrMoCuN25-20-7 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X1NiCrMoCuN 25-20-7 1.4529
2	EN 10253-4-2003
	X1NiCrMoCuN25-20-7 1.4529
3	ISO TS 15510-2003
	X1NiCrMoCuN25-20-7
4	EN 10088-2-2005
	X1NiCrMoCuN25-20-7 1.4539
5	EN 10088-3-2005
	X1NiCrMoCuN 25-20-7 1.4529
6	EN 10088-3-2014
	X1NiCrMoCuN25-20-7 1.4529
7	ISO 15510-2014
	X1NiCrMoCuN25-20-7 4529-089-26-I
8	ISO 9328-7-2018
	X1NiCrMoCuN25-20-7
9	DIN EN 10088-3-2014
	X1NiCrMoCuN25-20-7 1.4529
10	NF EN 10088-2-2005
	X1NiCrMoCuN25-20-7 1.4529
11	NF EN 10088-1-2005
	X1NiCrMoCuN25-20-7 1.4529
12	NF EN 10028-7-2008
	X1NiCrMoCuN25-20-7 1.4529
13	NF EN 10028-7-2000
	X1NiCrMoCuN25-20-7 1.4529

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!