SA335 Grade P36 K21001 - ASME SA-335/SA-335M-2021 - H2ABC

中文版

Grade	SA335 Grade P36
	K21001
Corresponding Standard	ASME SA-335/SA-335M-2021 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
Classification	Alloy Steel

SA335 Grade P36 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N	V	Al	Cb
Minimum Value	0.1	0.25	0.8	-	-	-	1	0.5	0.25	-	-	-	0.015
Maximum Value	0.17	0.5	1.2	0.03	0.025	0.3	1.3	0.8	0.5	0.02	0.2	0.05	0.045

SA335 Grade P36 Mechanical Properties

	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
	Class 1	Normalizing（≥900°C） + Tempering（≥595°C）	≥415	≥205	l: ≥15	HBW: ≤250 HV: ≤265 HRC: ≤25
	Class 2	cooled from the austenitizing temperature by accelerated cooling in air or by liquid quenching	≥660	≥460	l: ≥15

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!