Grade FNIC11 N08811 Type NIC11 - ASTM A965/A965M-2025

Grade	Grade FNIC11
USA UNS	N08811
Other Names
Corresponding Standard	ASTM A965/A965M-2025 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
Classification	Austenitic Stainless Steel

Grade FNIC11 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Ni	Cu	Ti ^①	Al ^①
Minimum Value	39.5	0.06	-	-	-	-	19	30	-	0.25	0.25
Maximum Value	-	0.1	1	1.5	0.04	0.015	23	35	0.75	0.6	0.6

① Ti+Al: 0.85%~1.20%.

Grade FNIC11 Mechanical Properties

Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
≥450	≥170	≥30

1 Approximate Comparison Table Corrosion-Resistant Alloy

2 Approximate Comparison Table Austenitic Stainless Steel

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	Numerical Grade
N08811	X8NiCrAlTi33-21	4959-088-11-U	1.4959

3 Approximate Comparison Table Corrosion-Resistant Alloy

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!