SPV 24 - JIS G 3115-1990

Grade	SPV 24
Corresponding Standard	JIS G 3115-1990 Steel Plates for Pressure Vessels for Intermediate Temperature Service
Classification	Carbon Steel

SPV 24 Chemical Element Composition Content (%)

Component	C ^①	Si	Mn	P	S
Minimum Value	-	0.15	-	-	-
Maximum Value	0.18	0.35	1.4	0.03	0.03

SPV 24 Mechanical Properties

thickness t mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
6≤t≤50	402~510	≥235	t≤16mm: ≥17 t＞16mm: ≥21 t＞40mm: ≥24
50＜t≤100	402~510	≥216	≥24
100＜t≤200	402~510	≥196	≥24

New and Old Grade Replacement List

Approximate Comparison Table High-Quality Carbon Structural Steel

China	Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
20	SB410 SGV410 SPV235 SPV24	A285 A285Gr.C	P3	ASt35 HI StE255	1.0345	A37AP A37CP	P235GH	1.0345	12k	1330 1330-01	141-360 161Gr.360

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!