Cu-ETP CW004A - EN 12165-2024

Grade	Cu-ETP
European Standard Steel Grade	CW004A
Corresponding Standard	EN 12165-2024 Copper and Copper Alloys - Wrought and Unwrought Forging Stock
Classification	Copper and Copper Alloys
Density	8.9 g/cm³

Cu-ETP Chemical Element Composition Content (%)

Component	Cu ^①	Pb	Bi	O ^②	Other Total ^③
Minimum Value	99.9	-	-	-	-
Maximum Value	-	0.005	0.0005	0.04	0.03

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

① Including Ag, up to a maximum of 0,015 %.
② Oxygen content up to 0,060 % is permitted, subject to agreement between the involved parties.
③ excluding Ag, O.

Approximate Comparison Table Processing Pure Copper, Silver Copper

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	Sweden	United Kingdom
JIS	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
C1100	C11000	Cu-ETP	E-Cu58 E2-Cu58	2.0065	CuA1	Cu-ETP	CW004A	M1	5010	C101

Cu-ETP Corresponding Standards(Same grade name, different standards)

1	CEN /TS 13388-2020
	Cu-ETP CR004A
2	GB /T 20078-2006
	Cu-ETP CW004A
3	DIN EN 12449-2019
	Cu-ETP CW004A
4	EN 12449-2023
	Cu-ETP CW004A
5	EN 13602-2013
	Cu-ETP CW004A
6	EN 13599-2014
	Cu-ETP CW004A
7	EN 12165-2024
	Cu-ETP CW004A
8	EN 13601-2021
	Cu-ETP CW004A

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!