CC401 - AS 1874-2000

Grade	CC401
Corresponding Standard	AS 1874-2000 Aluminium and Aluminium Alloys—Ingots and Castings
Classification	Aluminum and Aluminum Alloys

CC401 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Ni	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	12	-	-	-	-	-	-	-	-	Al:Remainder
Maximum Value	0.4	13	0.05	0.05	0.1	0.2	0.1	0.05	0.05	0.2	Al:Remainder

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CC401 Mechanical Properties

Casting method	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
Sand casting	As cast F1	≥160	≥5
Permanent mould casting	As cast F1	≥190	≥7

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!