11CrMo9-10 1.7383 - EN 10216-2-2024

Grade	11CrMo9-10
European Standard Steel Grade	1.7383
Corresponding Standard	EN 10216-2-2024 Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 2: Non-Alloy and Alloy Steel Tubes with Specified Elevated Temperature Properties
Classification	Alloy Steel

11CrMo9-10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	Al
Minimum Value	0.08	-	0.4	-	-	2	-	-	0.9	-
Maximum Value	0.15	0.5	0.8	0.025	0.01	2.5	0.3	0.3	1.1	0.04

11CrMo9-10 Mechanical Properties

wall thickness T mm	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
T≤60	540~680	ReH ≥355	l: ≥20；t: ≥18	20°C: l: ≥40；t: ≥27

• l = longitudinal; t = transverse.

Approximate Comparison Table Steel Plate for Boilers and Pressure Vessels

China	Japan	International Organization for Standardization	European Standard	Russia
GB	JIS	ISO	EN	GOST
12Cr2Mo1R GB/T 713.2-2008	STFA24 JIS G3467-1988	13CrMo9-10 ISO 9328-2004	11CrMo9-10 EN 10028-2003	10Х2М GOST 5520-1979

11CrMo9-10 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!