C10 - ISO 683-18-1996

Grade	C10
Corresponding Standard	ISO 683-18-1996 Heat-treatable steels, alloy steels and free-cutting steels
Classification	Carbon Steel
Properties	Carburizing Ability

C10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	0.07	0.15	0.3	-	-
Maximum Value	0.13	0.4	0.6	0.035	0.035

1 Approximate Comparison Table

International Organization for Standardization	Germany	France	European Standard		Russia	United Kingdom
ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
C10 C15M2	Ck10 Ck15	XC10 XC12	C10E	1.1121	08 10	045M10 CS12

2 Approximate Comparison Table

International Organization for Standardization	Germany	France	European Standard
ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade
C10	Ck10	XC10	C10R	1.1207

3 Approximate Comparison Table

China	Japan	United States	International Organization for Standardization	European Standard
GB	JIS	ASTM/AISI	ISO	EN
GB/T 699-2015 08	JIS G4051:2005 JIS G3506:2004 S10C	ASTM A29/A29M:2005 1008	ISO 683-18:1996 C10	EN 10083-1:1991+A1:1996 EN 10084:1998 C10E

4 Approximate Comparison Table

China		Japan	United States	International Organization for Standardization	European Standard
GB	ISC	JIS	ASTM/AISI	ISO	EN	Numerical Grade
10 (GB/T 699-2015)	U20102	S10C (JIS G4051:2005) (JIS G3506:2004)	1010 (ASTM A29/A29M:2005)	C10 (ISO 683:1986)	C10E (EN 10083-1:1991+A1:1996) (EN 10084:1998)	1.1121

C10 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!