N06059 - ASTM B 574-2023

Grade	N06059
Corresponding Standard	ASTM B 574-2023 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance Good Weldability
Density	8.6 g/cm³

N06059 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Cu	Mo	Co	Al	More
Minimum Value	-	-	-	-	-	-	22	-	15	-	0.1	Ni: remainder
Maximum Value	1.5	0.01	0.1	0.5	0.015	0.01	24	0.5	16.5	0.3	0.4	Ni: remainder

N06059 Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
/	Hot or Cold Finished, Solution Annealed	≥690	≥310	≥45
Grade 1	Cold-Worked	≥827	≥586	≥20
Grade 2	Cold-Worked	≥931	≥862	≥20
Grade 3	Cold-Worked	≥1103	≥1034	≥15

Approximate Comparison Table Corrosion-Resistant Alloy

N06059 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!