N06058 - ASTM B 574-2023 - H2ABC

中文版

USA UNS	N06058
Corresponding Standard	ASTM B 574-2023 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy
Classification	Nickel and Nickel Alloys
Density	8.8 g/cm³

Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Cu	Mo	N	W	Co	Al	More
Minimum Value	-	-	-	-	-	-	20	-	18.5	0.02	-	-	-	Ni: remainder
Maximum Value	1.5	0.01	0.1	0.5	0.015	0.01	23	0.5	21	0.15	0.3	0.3	0.4	Ni: remainder

Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %
Hot or Cold Finished, Solution Annealed	≥760	≥360	≥40

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!