中文版
Home Material ASTM B 574-2023
简体 | 繁體
USA UNS N06200
Corresponding Standard ASTM B 574-2023
Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy
Classification Nickel and Nickel Alloys
Properties Corrosion Resistance Low-Temperature Resistance High-Temperature Resistance
Density 8.5 g/cm3
Chemical Element Composition Content (%)
Component Fe C Si Mn P S Cr Cu Mo Co Al More
Minimum Value - - - - - - 22 1.3 15 - - Ni: remainder
Maximum Value 3 0.01 0.08 0.5 0.025 0.01 24 1.9 17 2 0.5
Mechanical Properties
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Specified Plastic Yield Strength
Rp0.2
Mpa 		Elongation or Extension Rate
δ
%
Hot or Cold Finished, Solution Annealed ≥690 ≥310 ≥45
Approximate Comparison Table Corrosion-Resistant Alloy
China United States Germany
GB ISC Commercial Grade UNS W-Nr.
NS 3405 H 06200
H 03405 		Hastelloy C -2000 N 06200 2.4675

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!