Cu-PHC CW020A - EN 13601-2021

Grade	Cu-PHC
European Standard Steel Grade	CW020A
Corresponding Standard	EN 13601-2021 Copper and Copper Alloys - Copper Rod, Bar and Wire for General Electrical Purposes
Classification	Copper and Copper Alloys

Cu-PHC Chemical Element Composition Content (%)

Component	P	Cu ^①	Pb	Bi	Ag ^①	Other Total
Minimum Value	0.001	99.95	-	-	-	-
Maximum Value	0.006	-	0.005	0.0005	0.015	0.03

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Cu-PHC Mechanical Properties

diameter (round, square, hexagonal), thickness or width (rectangular) d/t/w mm	Heat Treatment or Condition	Tensile Strength σ_b	Specified Plastic Yield Strength Rp_0.2	Elongation or Extension Rate δ %	Hardness HBW
2≤d≤160；0.5≤t≤40；5≤w≤250	H035①				HBW: 35~65 HV: 35~65
2≤d≤160；1≤t≤40；5≤w≤250	R200①	≥200	≤120	A100: ≥25 A: ≥35
2≤d≤80；0.5≤t≤40；5≤w≤200	H065				HBW: 65~90 HV: 70~95
2≤d≤10；1≤t≤10；5≤w≤200	R250	≥250	≥200	A100: ≥8 A: ≥12
10＜d≤30	R250	≥250	≥180	A: ≥15
30＜d≤140；10＜t≤40；10＜w≤200	R230	≥230	≥160	A: ≥18
2≤d≤40；0.5≤t≤20；1≤w≤120	H085				HBW: 85~110 HV: 90~115
40＜d≤80；20＜t≤40；20＜w≤160	H075				HBW: 75~100 HV: 80~105
2≤d≤20；1≤t≤10；5≤w≤120	R300	≥300	≥260	A100: ≥5 A: ≥8
20＜d≤40；10＜t≤20；10＜w≤160	R280	≥280	≥240	A: ≥10
40＜d≤60；20＜t≤40；20＜w≤160	R260	≥260	≥220	A: ≥12
2≤d≤10；0.5≤t≤5；1≤w≤120	H100				HBW: ≥100 HV: ≥110
2≤d≤10；1≤t≤5；5≤w≤120	R350	≥350	≥320	A100: ≥3 A: ≥5

• D: Material condition for the product as cold worked without specified mechanical properties;
• Hxxx: Material condition designated by the minimum value of hardness requirement for the product with mandatory hardness requirements；
• Rxxx: Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength, 0,2 % proof strength and elongation requirements

Approximate Comparison Table Copper and Copper Alloy

Germany		European Standard
DIN EN/DIN	W-Nr.	EN	Numerical Grade
SE-Cu	2.0070	Cu-PHC	CW020A

Cu-PHC Corresponding Standards(Same grade name, different standards)

1	CEN /TS 13388-2020
	Cu-PHC CW020A
2	DIN EN 12449-2019
	Cu-PHC CW020A
3	EN 12449-2023
	Cu-PHC CW020A
4	EN 13599-2014
	Cu-PHC CW020A
5	EN 13601-2021
	Cu-PHC CW020A

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!