CuNi18Zn19Pb1 2.0790 - DIN 17663-1983

Grade	CuNi18Zn19Pb1
Germany W-Nr.	2.0790
Corresponding Standard	DIN 17663-1983 Wrought Copper Alloys; Copper-Nickel-Zinc Alloys (Nickel-Silver), Chemical Composition
Classification	Copper and Copper Alloys
Properties	Good Machinability
Density	8.8 g/cm³

CuNi18Zn19Pb1 Chemical Element Composition Content (%)

Component	Fe	Mn	Ni	Cu	Pb	Other Total	More
Minimum Value	-	-	17	59	0.3	-	Zn:Rem
Maximum Value	0.3	0.7	19	63	1.5	0.4	Zn:Rem

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Approximate Comparison Table Copper and Copper Alloy

Germany		European Standard
DIN EN/DIN	W-Nr.	EN	Numerical Grade
CuNi18Zn19Pb1	2.0790	CuNi18Zn19Pb1	CW408J

CuNi18Zn19Pb1 Corresponding Standards(Same grade name, different standards)

1	EN 12166-1998
	CuNi18Zn19Pb1 CW408J
2	EN 12166-2016
	CuNi18Zn19Pb1 CW408J
3	DIN 17672-1-1983
	CuNi18Zn19Pb1 2.0790
4	DIN EN 12166-2016
	CuNi18Zn19Pb1 CW408J
5	DIN EN 12166-1998
	CuNi18Zn19Pb1 CW408J
6	EN 12167-2024
	CuNi18Zn19Pb1 CW408J
7	DIN 17663-1983
	CuNi18Zn19Pb1 2.0790

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!