AMPCO 18.136

Grade	AMPCO 18.136
Brand/Supplier	Switzerland -> AMPCO METAL
Classification	Copper and Copper Alloys
Density	7.45 g/cm³

AMPCO 18.136 Chemical Element Composition Content (%)

Component	Fe	Al	Other Total	More
Minimum Value	-	-	-	Cu:Rem
Maximum Value	3.5	10.5	0.5	Cu:Rem

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

AMPCO 18.136 Mechanical Properties

Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Yield Point σ_s Mpa	Fatigue Limit Bending σ-1 Mpa	Fatigue Limit Tensile σ-1T Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %	Hardness HBW	Impact Energy Absorption KV2 J	Bending Strength σ_w Mpa
689	Rp0.5 289	Rmc 979	（100000000 cycle） 214	Rpc 221	20	20	170	22	Rcm 386

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!