HSn60-1 T46410 - GB /T 21652-2017

Grade	HSn60-1
China ISC	T46410
Corresponding Standard	GB /T 21652-2017 Copper and Copper Alloy Wire
Classification	Copper and Copper Alloys
Properties	Good Weldability

HSn60-1 Chemical Element Composition Content (%)

Component	Fe ^①	Cu	Pb	Sn	Other Total	More
Minimum Value	-	59	-	1	-	Zn:余量
Maximum Value	0.1	61	0.3	1.5	1	Zn:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

HSn60-1 Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
0.5~2.0	软(O60)	≥315	A_100mm ≥15
＞2.0~4.0	软(O60)	≥305	A_100mm ≥20
＞4.0~6.0	软(O60)	≥295	A_100mm ≥25
0.5~2.0	硬(H04)	590~835	/
＞2.0~4.0	硬(H04)	540~785	/
＞4.0~6.0	硬(H04)	490~735	/

Approximate Comparison Table Brass

China	United States	International Organization for Standardization	Germany	European Standard		Russia
GB	ASTM	ISO	W-Nr.	EN	Numerical Grade	GOST
HSn60-1	60Cu-39Zn-1Sn	CuZn39Sn1	CuZn39Sn1	CuZn39Sn1	CW719R	ЛО60-1

HSn60-1 Corresponding Standards(Same grade name, different standards)

1	GB /T 5231-2012
	HSn60-1 T46410
2	GB /T 5231-2022
	HSn60-1 T46410
3	GB /T 21652-2017
	HSn60-1 T46410

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!