Grade 30CrMo
Corresponding Standard GB /T 44457-2024
Hydrogen Storage Pressure Vessel Used in Hydrogen Refueling Station
Classification Alloy Steel
30CrMo Chemical Element Composition Content (%)
Component C Si Mn P S Cr Ni Cu Mo More
Minimum Value 0.26 0.17 0.4 - - 0.8 - - 0.15 P+S≤0.02
Maximum Value 0.33 0.37 0.7 0.015 0.008 1.1 0.3 0.2 0.25
• The allowable deviation of the finished product analysis of the chemical composition of seamless steel pipe materials is: P: +0.003%, S: +0.002%, and other elements shall comply with the provisions of GB/T 222. The total mass fraction of alloying elements such as V, Nb, Ti, B and Zr should not exceed 0.15%.
30CrMo Mechanical Properties
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Specified Plastic Yield Strength
Rp0.2
Mpa
Elongation or Extension Rate
δ
%
Impact Energy Absorption
KV2
J
quenching and tempering 800~880 ReL
≥520
≥20 -40°C
≥47
1 Approximate Comparison Table Structural Alloy Steel
China Taiwan, China Japan South Korea United States France European Standard
GB ISC CNS JIS KS ASTM NF EN/NF EN
30CrMo A30302 SCM430 SCM430 SCM430 4130 30CD4 34CrMo4
2 Approximate Comparison Table Alloy Steel for Quenching and Tempering
China Japan International Organization for Standardization European Standard
GB ISC JIS ISO EN Numerical Grade
30CrMo A30302 SCM425
SCM425H
25CrMo4 25CrMo4 1.7218
3 Approximate Comparison Table Structural Alloy Steel
China Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB JIS SAE ISO DIN EN/DIN NF EN/NF EN Numerical Grade GOST SS BS EN/BS
30CrMo SCM420
SCM430
4130 25CrMo4 25CrMo4 25CD4 25CrMo4 1.7218 20KHM
30KHM
30KHMA
2225 708A25
708M25
CFS10
4 Approximate Comparison Table Structural Alloy Steel
China United States
GB ASTM/AISI
30CrMo A519 Gr4130

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!