60CrMnMo A34603 - GB /T 1222-2025

60CrMnMo Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo
Minimum Value	0.56	0.17	0.7	-	-	0.7	-	-	0.25
Maximum Value	0.64	0.37	1	0.025	0.02	1	0.35	0.2	0.35

60CrMnMo Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Specified Plastic Yield Strength Rp_0.2 Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
Quenched in oil at 860±20°C and tempered at 450±50°C	≥1450	ReL ≥1300	≥6	≥30

1 Approximate Comparison Table Spring Steel

China		Taiwan, China	Japan	South Korea	United States		International Organization for Standardization	Germany		France	United Kingdom
GB	ISC	CNS	JIS	KS	AISI	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	BS EN/BS
55CrMnMoA	A34603	SUP13	SUP13	SPS9	4160	G41600	60CrMo3-3	≈51CrMoV4	1.7701	≈51CDV4	705H60

2 Approximate Comparison Table Spring Steel 1

China	Japan	International Organization for Standardization	European Standard
GB	JIS	ISO	EN
60CrMnMo	SUP13	60CrMo3-3	60CrMo3-3

60CrMnMo Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!