X10CrNiMoMnNbVB15-10-1 1.4982 - EN 10269-1999

Grade	X10CrNiMoMnNbVB15-10-1
European Standard Steel Grade	1.4982
Corresponding Standard	EN 10269-2006 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X10CrNiMoMnNbVB15-10-1 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N	V	Nb	B
Minimum Value	0.07	-	5.5	-	-	14	9	0.8	-	0.15	0.75	0.003
Maximum Value	0.13	1	7	0.04	0.03	16	11	1.2	0.11	0.4	1.25	0.009

①Elements not listed in this table may not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the usefulness of the steel.

Approximate Comparison Table

United States	International Organization for Standardization		European Standard
UNS	ISO	Numerical Grade	Numerical Grade
S21500	X10CrNiMoMnNbVB15-10-1	4982-215-00-E	1.4982

X10CrNiMoMnNbVB15-10-1 Corresponding Standards(Same grade name, different standards)

1	EN 10088-1-2005
	X10CrNiMoMnNbVB 15-10-1 1.4982
2	EN 10269-2006
	X10CrNiMoMnNbVB15-10-1 1.4982
3	EN 10269-2013
	X10CrNiMoMnNbVB 15-10-1 1.4982
4	ISO 15510-2014
	X10CrNiMoMnNbVB15-10-1 4982-215-00-E
5	NF EN 10269-1999
	X10CrNiMoMnNbVB15-10-1 1.4982
6	DIN EN 10269-2014
	X10CrNiMoMnNbVB 15-10-1 1.4982
7	ISO 4955-2016
	X10CrNiMoMnNbVB15-10-1 4982-215-00-E
8	NF EN 10088-1-2005
	X10CrNiMoMnNbVB15-10-1 1.4982

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!