NiCr20TiAl 2.4952 - EN 10269-2006

Grade	NiCr20TiAl
European Standard Steel Grade	2.4952
Corresponding Standard	EN 10269-2006 Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
Classification	Nickel and Nickel Alloys
Properties	High Strength Corrosion Resistance High-Temperature Resistance
Density	8.2 g/cm³

NiCr20TiAl Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Ni	Cu	Ti	B	Co	Al
Minimum Value	-	0.04	-	-	-	-	18	65	-	1.8	-	-	1
Maximum Value	1.5	0.1	1	1	0.02	0.015	21	-	0.2	2.7	0.008	1	1.8

①Elements not listed in this table may not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. All appropriate precautions are to be taken to avoid the addition of such elements from scrap and other materials used in production which would impair mechanical properties and the usefulness of the steel.

Approximate Comparison Table Deformed High-Temperature Alloy

China	United States	International Organization for Standardization	European Standard
GB	SAE	ISO	EN	Numerical Grade
GH4080A 80A①	HEV5	NiCr20TiAl	NiCr20TiAl	2.4952

NiCr20TiAl Corresponding Standards(Same grade name, different standards)

1	EN 10269-2006
	NiCr20TiAl 2.4952
2	EN 10302-2008
	NiCr20TiAl 2.4952
3	EN 10269-2013
	NiCr20TiAl 2.4952
4	DIN 17742-2002
	NiCr20TiAl 2.4952
5	GB /T 3098.24-2020
	NiCr20TiAl SB UNS N07080 合金 80A
6	VDI 2230-1-2015
	NiCr20TiAl 2.4952
7	DIN EN 10269-2014
	NiCr20TiAl 2.4952
8	DIN 17240-1976
	NiCr20TiAl 2.4952
9	DIN 17742-2020
	NiCr20TiAl 2.4952
10	ISO 683-15-1992
	NiCr 20 TiAl
11	ISO 4955-2016
	NiCr20TiAl 4952-070-80-I

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!