中文版
Home Material DIN 1654-5-1989
简体 | 繁體
Grade X10Cr 13
Germany W-Nr. 1.4006
Corresponding Standard DIN 1654-5-1989
Cold heading and Cold Extruding Steels Technical Delivery Conditions for Stainless Steels
Classification Martensitic Stainless Steel
X10Cr 13 Chemical Element Composition Content (%)
Component C Si Mn P S Cr
Minimum Value 0.08 - - - - 12
Maximum Value 0.12 1 1 0.045 0.03 14
X10Cr 13 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Reduction of Area
ψ
% 		Impact Energy Absorption
KV2
J
Steel spheroidizing (GKZ) or Spheroidizing + peeling (GKZ+SH) ≤600 ≥60
Steel Cold draw + spheroidizing (K+GKZ) ≤600 ≥62
Steel Cold draw + spheroidizing + slightly cold redraw (K+GKZ+K) ≤640 ≥62
Steel quenching and tempering 600~800 ≥420 ≥18 ≥50
New and Old Grade Replacement List
Corresponding Standard Grade
DIN 1654-5-1989
Grade
Germany W-Nr.
DIN EN 10263-5-2002
Grade
Germany W-Nr.
DIN EN 10263-5-2018
Grade
Germany W-Nr.
1 Approximate Comparison Table Martensitic Stainless Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
12Cr13
(1Cr13) 		S41010 410 SUS 410 STS 410 410 S41000 X12Cr 13 4006-410-00-I X10Cr 13
X12Cr 13 		1.4006
1.4006 		Z12C 13
Z10C13 		X12Cr 13 1.4006 12Х13
12KH13
15KH13L 		2302 410S21
2 Approximate Comparison Table Martensitic Heat-Resistant Steel
China Taiwan, China Japan South Korea United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
GB ISC CNS JIS KS ASTM UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
12Cr13
(1Cr13) 		S41010 410 SUS 410 STS 410 410 S41000 X12Cr 13
3
(ISO 683-13-1986) 		X10Cr 13 1.4006 Z12C 13 X12Cr 13 1.4006 12Х13 2302 410S21
X10Cr13 Corresponding Standards(Same grade name, different standards)
1 DIN 17440-1972
X10Cr 13 1.4006
2 EU 95-1979
X10Cr 13
3 DIN 1654-5-1989
X10Cr 13 1.4006

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!